Model D4000 SP1 Inspector
TM
Operator’s Guide
RJS, Minneapolis, MN 002-5572
2
1.8 Installing Batteries
Slide open the plastic cover on the back of the unit. Position the cloth battery “pull strip” down then insert 4
(included) batteries according to the positive/negative markings.
Note: If all 4 batteries are inadvertently installed backwards, the inspector unit will be damaged.
Remove batteries when the unit will not be used for a period of weeks. Also, remove batteries when storing
the unit.
Warning: Never charge alkaline batteriesthis will damage the unit.
1.9 Technical Support
Please read the manual and try to understand it, first.
If you need assistance over the phone, please have the following information ready:
Model and serial number of your unit
Do you have a maintenance contract in effect
Have a test print available if applicable
Detailed explanation of the problem or question
Your company’s phone and fax numbers
RJS
701 Decatur Avenue North
Suite 107
Minneapolis, MN 55427
(763) 746-8034 - phone
(763) 746-8039 - Fax
To Next Page
Loading...