RKC INSTRUMENT FAREX SR MINI SYSTEM - When Using Operation Panel; Host Communication Setting

3. SETTING FOR COMMUNICATION
IMSRM04-E8
22
3.2 When Using Operation Panel
The host communication setting between the operation panel and host computer is made (on these
operation panel and host computer); the communication setting between the operation panel and
control unit is made (on these operation panel and control unit) and computer/local selection is made
(on the operation panel).
Host computer
Control unit
Operation panel
Communication
setting
Host
communication
setting
Communication setting
-Data configuration
-Communication speed
-Unit address, etc.
Host communication setting
-Data configuration
-Communication speed
-Operation panel address, etc.
Communication setting
-Data configuration
-Communication speed, etc.
Computer/Local transfer
3.2.1 Host communication setting
Host communication setting (data configuration, communication speed, operation panel address, etc.)
are to be set on the screen of the operation panel.
Set the same host communication setting to both the operation panel and connecting host computer.
For details on the setting and operating procedure, see the each operation panel instruction manuals.
OPM: See the Host Communication Initialize screen in the Operation panel OPM
Instruction Manual (IMSRM03-E



)
OPM [Z-191]: See the Host Communication Initialize screen in the Operation panel OPM [Z-
191] Instruction Manual (IMSRM21-E



)
OPL: See the Host Communication Initialize screen in the Operation panel [OPL]
Instruction Manual (IMSRM11-E



)
OPM-H [Z-191]: See the Host Communication Initialize screen of the Operation panel OPM-H
[Z-191] Instruction Manual (IMSRM26-E



)