IMSRM04-E8
i-3
CONTENTS
Page
1. SPECIFICATIONS................................................................1
1.1 Control Unit .....................................................................................................1
1.2 OPM, OPM Z-191 and OPM Z-191 [CE/UL/CSA Conformed] ........................2
1.3 OPL, OPL [CE/UL/CSA Conformed] ...............................................................3
1.4 OPM-H ............................................................................................................4
1.5 Terminal Voltage and Signal Logic..................................................................5
2. CONNECTING.......................................................................6
2.1 Connection Block Diagram..............................................................................7
2.1.1 When connecting control unit with host computer directly.................................. 7
2.1.2 When using operation panel .............................................................................. 8
2.2 Connection Between the Control Unit and a Host Computer...........................9
2.2.1 When the dedicated cable is not used ............................................................... 9
2.2.2 When using the dedicated cable ......................................................................10
2.3 Connection Between the Operation Panel and a Host Computer..................11
2.3.1 OPL or OPL [CE/UL/CSA Conformed]..............................................................11
2.3.2 OPM or OPM Z-191 connection........................................................................14
2.3.3 OPM Z-191 [CE/UL/CSA Conformed] connection.............................................16
2.3.4 OPH Z-191 connection .....................................................................................18
3. SETTING FOR COMMUNICATION ....................................20
3.1 When Connecting Control Unit with Host Computer Directly ........................20
3.2 When Using Operation Panel........................................................................22
3.2.1 Host communication setting..............................................................................22
3.2.2 Between operation panel and control unit communication setting.....................23
3.2.3 Computer/Local transfer ...................................................................................24
To Next Page
Loading...