Finally you are ready to test ride
your RKR BMX! Before you do so,
make sure your tyres are pumped
up to the desired pressure. Please
note standard RKR tyres have a max
pressure of 40psi. STREET PRO
tyres (found as standard on Rocker
3+ and Irok+ coaster
models) have a max pressure of
65psi. It is VERY important you DO
NOT exceed this pressure.
If you want to upgrade to STREET
PRO tyres at any time they are
available from www.rockerbmx.com
in a wide variety of colours.
If you need to repair a puncture at
any stage, please note that you will
need to split the rim to get the tyre
off. You cannot use tyre levers to
get the tyre off and if you do try to
do so, you may bend the steel rims.
Undo the 5 rim bolts and you will
see that the rim comes apart in
2 pieces with the hub assembly
welded to one side. You can now
replace/repair the inner tube
(available from www.rockerbmx.
com)
Upgrade parts & merch available:
stem, sprocket, bars, tyres, wheels
and a whole lot more!
To Next Page
Loading...