Need help?Do you have a question about the RND 320-KA3005D and is the answer not in the manual?
General| Brand | RND |
|---|---|
| Model | 320-KA3005D |
| Category | Power Supply |
| Language | English |
Explains the meaning of safety symbols used in the manual and on the device.
Essential guidelines for safe operation and handling of the device.
Specifications for AC voltage, frequency, and grounding requirements.
Recommended environmental conditions for device operation.
Recommended environmental conditions for device storage.
Instructions and warnings for fuse replacement and type.
Details on different product models and their specifications.
Highlights performance, operation, and protection features of the device.
Explains front panel displays for voltage, current, and status indicators.
Describes the functions of various buttons on the front panel.
Details on adjusting voltage and current levels using the knob and buttons.
Explains indicators for OVP and other operational conditions.
Defines indicators such as OCP, C.C, C.V, and OUT.
Explains indicators for memory settings and panel lock status.
Brief introduction to saving and recalling panel settings.
Functions for locking the panel and enabling/disabling beeps.
Controls for Over-Current Protection (OCP), Over-Voltage Protection (OVP), and Output On/Off.
How to adjust voltage and current using the knob and selector buttons.
Explains the main power switch and output/ground terminals.
Details on USB and RS232 interfaces for remote control.
Information on the power socket, fuse, and grounding requirements.
Steps for connecting the AC power cord and operating the power switch.
How to control the output and conditions for automatic shutdown.
How to manage beep sounds and lock the front panel.
Steps for setting output and saving panel configurations.
How to recall saved panel settings using memory buttons.
Configuration for connecting and controlling the device via PC.
Procedures for establishing remote control connection.
Steps to disconnect from remote control and return to panel mode.
Answers to common operational and troubleshooting queries.
Detailed electrical and performance specifications for the model.
Specifies load/line regulation, accuracy, ripple, and temp. coefficient.
Details reaction time, available interfaces, and accessories.
Provides the weight and physical dimensions of the device.
To Next Page
