R
OADMASTER manufactures a wide variety of components designed for vehicle-specic towing applications.
More components are available at tmaster.roadmasterinc.com, or call Technical Support at 800-669-9690.
Vehicle-specific components
— Advertisement —
Charge Line Kits
Brake light switches
Why do you need a brake light
switch? Brake light switches are
necessary only if you’re install-
ing a supplemental braking sys-
tem monitor, and the vehicle’s
OEM brake light switch doesn’t
work when the vehicle is in ‘tow’
mode.
This switch is only activated when the brake pedal is de-
pressed. No other manufacturer provides brake light switch-
es with this level of specicity. Why? When you know when
the towed vehicle’s brake pedal is depressed and released,
you know if the supplemental braking system is positioned
properly and working as it should.
• Works on any vehicle with a brake pedal.
• Works with any supplemental braking system that
moves the brake pedal.
• Works with any motorhome monitor
751000 Universal brake light switch
• Truly universal — works with all braking
systems that depress the brake pedal.
• Exceptional range and reliability — line-
of-sight transmission conrmed to 1,000
feet; proprietary send/repeat circuitry
conrms each signal at 100% reception.
• Protects the towed vehicle’s brakes —
reports any braking activity to the motorhome monitor; in-
cludes a low-battery alert, extended braking and break-away
alarms, and ve other audio and/or visual alarms and system
status notications.
• 30-minute installation, all at the towed vehicle; simply plug
the motorhome monitor into any 12-volt outlet.
• Automatic operation — activates only when the vehicles are
connected for towing.
Specications — frequency: 923 MHz; voltage: 12V; sleep
current: 30mA
9530 Universal supplemental braking system monitor
Wireless supplemental
braking system monitor
How about if you never had to spend another minute with your face on the oor
mat, gazing up into a black void, hunting for a miniscule piece of plastic playing hide
and seek? You don’t have to.
FuseMaster
76511
• You've spent enough time with your face on the oor mat.
• Adventures in electricity can be, well, electrifying.
• Chiropractors are expensive.
• Engine lubricant is not a fashion accessory.
FuseMaster eliminates the necessity of having to remove a fuse for towing, then hav-
ing to reinsert it for driving. After it’s installed, you simply ip a switch to accomplish
the same task.
76511 15-amp fuseholder 76512 Two 7.5-amp fuseholders
76514 Two 15-amp fuseholders 76515 30-amp fuseholder
76517 50-amp fuseholder
Many current vehicles have features that slowly drain the battery
while in tow mode.
These simple, easy-to-install kits help maintain the vehicle’s battery
charge while in tow, supplying up to 15 amps of current. They also
extend battery life by providing a constant maintenance charge (with-
out overcharging the battery) during towing. Installation hardware in-
cluded.
• Heavy-duty 14-gauge wire (156-25) or 12-gauge (156-75) wire
• Includes a thermal circuit breaker — no need to hunt down a
blown fuse
156-25 Towed vehicle charge line kit
156-75 Motorhome charge line kit
156-75
To Previous Page
Loading...