EasyManua.ls Logo

Roadstar PCD-495MP - Page 8

Roadstar PCD-495MP
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EnglishEnglish
not write on the label side of the disc with a ball/point pen as this may scratch the disc.
SPECIFICATIONS
Audio
D/A conversion 1-bit DAC , 8 times oversampling
Frequency response 20-20,000Hz
Anti-shock 45 seconds CD/ 120 seconds MP3 memory
Wow and flutter Below measurable limits
No. of channels 2 channels (stereo)
Output level Line output: 0.6V rms (47KOhm )
Headphone: 20mW (32Ohm)
MP3
MPEG Rate 32-384 Kbps
Sampling Frequency 8/48KHz
MP3 Playback ISO9660 format compatible
Check the CD burner/recorder’s documentation to see if it complies with these specifications.
General
Power requirements -2 x LR6 / UM-3 / “AA” alkaline battery
- DC in 4.5V jack accepts AC power adaptor
(centre positive)
Power consumption 0.8W (DC 3V)
Dimension Approx. 143mm of diameter X 24mm (D)
Weight (without batteries) 210 g.
Note: Specifications and the design are subject to possible modifications without notice.
11 12
PCD-495MP_EN.pmd 05/11/2013, 18.366

Related product manuals