Interior Living Space
17
© 2014 by Roadtrek, Inc.
Rear Table
Table leg stowed Rear table T-Nut Rear table set up for use
The rear tabletop is stored under the driver's side rear bench seat, and its leg is stored within the wardrobe.
The dining table for the rear seating area is located under the driver's side rear bench cushion, directly across from the TV.
Lift the cushion and remove the table top. The table leg is stored in the narrow ledge above the passenger side door. Unscrew
the T-nut on the end of the leg fully. Insert the T-nut into the slot in the table leg base. Rotate the leg clockwise until you feel
it tighten. Pull on it to check that is is secured. If not, extend the T-nut fully by unscrewing it, and try again. Place table top on
the table leg so that the top of the leg fits into the socket underneath the table.
Store the table top under the cushion with the socket seated in the hole in the side bench base, and return the table leg to
the proper location and clip into place for proper storage.
To Next Page
Loading...
