To Next PageTo Next Page
Need help?Do you have a question about the Roberts Gorden Corayvac CRV-B Series and is the answer not in the manual?
General| Series | CRV-B |
|---|---|
| Category | Heating System |
| Manufacturer | Roberts Gordon |
| Fuel Type | Natural Gas or Propane |
| Input | Varies by model |
| Heat Output | Varies by model |
| Application | Commercial and Industrial Spaces |
| Ventilation | Vented |
| Efficiency | Up to 93% |
| Mounting | Suspended |
Details the necessary distances from combustible materials to the heater.
Provides instructions for installing the radiant tubing, including slopes.
Details the process of assembling the tube couplings for the system.
Guides the installation of reflectors, ensuring proper support and overlap.
Explains the procedure for installing the burner assembly.
Covers general venting rules and requirements for specific pump models.
Steps to verify the gas line pressure and integrity before operation.
Procedures to check electrical system power and zone operation.
Step-by-step guide to initiating the heating system.
Instructions for setting system vacuum levels for optimal performance.
Details the parameter settings required for the VFD with modulating controls.
Provides a table of VFD parameters to alter for specific configurations.
Specifies VFD parameter changes for modulating thermostat systems.
Lists VFD parameters to adjust for modulating thermostat setups.
Guides setting the vacuum at the end burner for proper operation.
Instructions for adjusting VFD settings for maximum and minimum speeds.
Details the necessary maintenance and inspection schedule for safety and performance.
A flowchart to diagnose and resolve common operational issues.
