7
Operation Instructions
Control Panel
On / Off
Product is switched on or off.
Dryness Level
(Extra/Standard/Less)
Start / Pause
Press the button to start or pause the drying cycle.
Anti-Crease
At the end of the drying cycle, the anti-crease
phase time is 30 minutes (default) or 120
minutes (selected).
Program
Different dryer cycle can be selected according to
the user’s needs to make the clothes have more
effective drying results.
• Press the [ Program ] button to select the desired program.
• Press the [ Dryness Level ]button to select the desired program.
• Press the [ Anti-Crease ] button to start Anti-Crease function.
• Press the [ Start/Pause ]button.
• Press the [ Delay ]button to booking the drying process.
• If users need child lock function, pressing the [ Program ] and [ Dryness Leve ] buttons
simultaneously for over 3 seconds to start child lock function. Press the two button 3sec. also to be
released the function. The “Child Lock” will lock all buttons except 【On/Off】. Cut off the power
supply , the kid’s protection is to be released.
• The buzzer will prompt from the dryer when finishing the cycle. Press the
【On/Off】 button and pull out the power cable.
• Clean the filter, cabinet and inner tube.
• Clean the filter when the “Filter” light is flashing, after the dryer stop.
To Next Page
Loading...
