• Connect the micro USB plug to the input jack on the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack
or line-out of any audio device.
• Slide the Power Switch on the speaker to the ON position.
The blue power light will come on.
• Press play on your audio device and adjust its volume to
listen to audio.
Note: the larger USB plug is used for charging only, not
for audio. Please refer to next section for charging
instructions
Connecting the Ri-26
The Ri-26 is powered by a rechargeable battery in the
speaker. When the blue power light dims, or if you start to
notice sound distortion at higher volumes, it's time to recharge
the battery.
• Connect the larger USB plug to a powered USB port, such as
that on a computer. The light on the speaker will turn to red
while charging and turn blue when fully charged.
Note: you can continue to listen to the speaker while its
charging
Charging the Ri-26
Charging the Ri-26 Connect To Audio Source
Ri-26 IB inisde
324Wmm x 140Hmm
Print in Black color
April 18,12
mobile phone PSP iPod
Laptop
PC
MP3/MP4
USB 2.0
USB Connection
LED
NOTE: Remember to turn power OFF on speaker when not
in use to save battery life.
Power Switch
To audio
source
To Ri-26
To powered
USB port
To Previous Page
Loading...