17
b)power and control systems for electric wheelchairs - requirements and test methods
(SO 7176-14).
Yes □
c)climatic test in accordance with ISO 7176-9.
Yes □
d)requirements for resistance to ignition in accordance with ISO 16840.
Yes □
e)Personal data security compliant with GDPR.
Yes □
2.Product introduction
2.5 Storage conditions
2.4 Following standards
The packaging storage temperature is -20 ℃～60 ℃.
The relative humidity is no more than 95 %.
The atmospheric pressure shall be 56～110 kPa.
The Electric Wheelchair shall be stored in the ventilated room without the
harmful gas which may cause corrosion, and it is not allowed to press and pile
up.
Under packed status, the maximum piling height is 5 layers.
Do not store the product in environments that are near sources of high
temperature or direct sunlight for extended periods of time.
If the product will not be used for a long term, please store the Electric
Wheelchair is fully charged and power off.
If the product is stored exceeding one month, please fully charge, and then
continue storing and using.
The wheelchair conforms to the following standards:
a)requirements and test methods for static, impact and fatigue strengths (1SO 7176-8).
Yes □
To Next Page
Loading...