44
Transferring users from other to wheelchairs
1. Put the power wheelchair in the locked state;
2. Carry the user to the cushion of the power wheelchair (the user can also walk over
and sit on the cushion by himself/herself, if he/she is able to do so);
3. fasten the seat belt;
4. organise the user's feet to the footrest;
5.start driving to use the power wheelchair.
Driving under different road conditions
The device can maintain stability under a wide range of conditions.
However, it cannot be driven under the following conditions.
• Steps higher than 2 inches (50 mm)
More than 2 inches
(50 mm)
• Slopes with a gradient of 10° or more
10° or more
• Soft surfaces such as sand, mud, snowy or frozen
paths.
* Driving on gravel, light snow, and grass is possible.
4.Use of the Electric Wheelchair
4.12
To Next Page
Loading...