Please make sure BIKI is powered off when fixing the
caudal fin. To remove the tail, it’s just the other way
around. Press the tail and rotate it by 90°, then
remove it.
1. Hold the tail in horizontal
direction and fix it to BIKI
2. Press it and rotate it by 90°
For the Beginners
Step 1: Fit the fish tail on
Step 2: Switch BIKI on
1.Please long press the power switch
for 3-5 seconds
2.The blue light is on and
the tail stays in the middle
1
1. Hold the tail in horizontal
To Next Page
