Figure C-3 RS-Helios-16P Data Streaming in RSView
C.5 Capture Streaming RS-Helios-16P Data to PCAP File
1. Click the Record button when streaming (Figure C-4).
Figure C-4 R RSView Record Button.
2. In the “Choose Output File” dialog that pops up, set the save path and file name, and then click
the Save (S) button (Figure C-5). RSView will start to write the packet file into the target pcap file.
Note: RS-Helios-16P will generate huge volume of data. As the recording time becomes longer, the target pcap file
will become larger. Therefore, it is better to save the recorded file to the HDD or SSD instead of a slow subsystem
such as a USB drive or network drive.
Figure C-5 RSView Record Saving Dialog.
To Next Page
Loading...
