Robosoft RBS-24ED - Page 29

RBS-24ED
KEY Ć
NO.
PART
NO.
DESCRIPTION
1 7249079 Rep'l PWA
2 7250826 Power Cord
3 7221746 Screen
4 7221746 Brine Tube
5 7113016 Tubing Assembly
6 7131365 Screen
7 7080653 Clip
8 7092252 Brine Valve Body
9 1205500 Clip
10 7221754 Float, Stem & Guide Assembly
11 7250884 Salt Hole Cover
12 7155115 Brinewell Cover
13 7082150 Wing Nut, 1/4 - 20
14 7100819 Brinewell
15 7148875 Screw, 1/4 - 20 Nylon
16 7003847 O-ring
17 7238531 Repl. Brine Tank
18 0900431 Hose Clamp
KEY
NO.
PART
NO.
DESCRIPTION
19 1103200 Hose Adaptor
20 9003500 Grommet
21 0501741 Resin, 26-1/2 lbs (1/2 cu ft)
0502272 Resin, 53 lbs (1 cu ft)
22 7105047 Repl. Bottom Distributor
23 7113058 Resin Tank, 8 in. dia x 40 in.
24 7088033 Clamp Retainer (2)
25 7176292 Clamp Section (2)
26 7170270 O-ring Seal, 2-3/4 in. x 3 in.
27 7077870 Top Distributor
28 7170254 O-ring Seal, 13/16 in. x 1-1/16 in.
29 7170296 O-ring Seal, 2-7/8 in. x 3-1/4 in.
30 7237381 Vapor Barrier
31 7225499 Locking Plate
32 7223528 Faceplate Cover (order decal below)
7251848 Decal (for above cover)
33 7235460 Weather Cover