8 For more information, visit global.irobot.com
EN
Washing the Bin
Cleaning the Full Bin Sensors
Wipe the inner sensors with a
clean, dry cloth.
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Wipe the bin door with a clean, dry cloth.
2
3
3
Important: Do not wash the filter.
Remove the filter before washing the bin.
Release the bin, remove the filter,
and open the bin door.
Remove and empty the bin.
1
1
Note: Bin is not dishwasher safe.
Use a coin or small screwdriver
to remove the screw holding the
Edge-Sweeping Brush in place.
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris,
then reinstall the brush.
Cleaning the Edge-Sweeping Brush
1
2
Rinse the bin using warm water.
2
Closed Door
Opened Door
To Next Page
Loading...
