10 For more information, visit global.irobot.com
EN
Note: To achieve optimal performance
with your robot and automatic dirt
disposal, clean and/or replace your
robot's filter as needed.
Install a new bag, sliding the
plastic card into the guide rails.
Discard the used bag.
Press down on the lid making
sure it is completely closed.
4
3
5
Note: This will
seal the bag so
dust and debris
cannot escape.
Replacing the Bag
Pull up on the plastic card to remove
the bag from the canister.
Lift up on the canister lid to open.
1
2
Removing Debris from Blower
Cover
Inspect blower cover for any lint or debris
built-up, and wipe with a clean dry cloth
to remove.
To Next Page
Loading...
