Robustel R2000 dual - Page 15

Robustel GoRugged R2000 Dual Quick Guide
RT_QG_R2000 Dual_v.1.0.2 11.11.2016 15/21
Confidential
browser without a password before timeout.
Submit
Click to submit the modification on current configuration page.
Cancel
Click to cancel the modification on current configuration page.
Note: The steps of how to modify configuration are as bellow:
1. Modify in one page;
2. Click under this page;
3. Modify in another page;
4. Click under this page;
5. Complete all modification;
6. Click .
3.3 Configure the Cellular
1. Configure the Cellular
Go to Interface > Link Manager > General Settings
Select WWAN1 as Primary Link, WAN as Backup Link, and Cold Backup as Backup Mode.
Link Settings section allows user to configure the parameter of link connection, include the WWAN1/WWAN2,
WAN and WLAN. It is recommended to enable Ping detection to keep router always online.
The Ping detection increases the reliability and also cost data traffic.