Rocelco BSTC - Assembly and Installation Steps; Install Casters to Base; Install Poles to Base

1.1 Install casters to base
1.2 Install poles to base
Step1
1.1
B
A
B
A
E
Step3
Turn base upright
Step2
Turn over base
Step4
1.2
A
A
A
A
A
A
E
Step5
Use your finger to depress the right upper pole spring
plunger ball located in the cable window. Carefully pull the
upper pole upward until your desired height is reached
Twist upper pole toward the plunger holes, and engage
the spring ball into the plunger hole to set in place
Repeat step5 with left pole.
Step6a
Step6b
0