106
The Device settings menu appears.
Press o to select Mode settings.
In the Settings menu, press z to move to
Device settings.
Press o to select.
Set the Signal suspension
You can suspend the signals of Warnings for all modes for a
specified period of time.
However, since Errors and Maintenance messages require your
immediate attention, you cannot suspend these event signals.
Also, the Reminders you programmed will not be silenced.
The Mode settings menu appears.
Press x or z to move to Normal, Vibrate,
Quiet or Loud.
Press o to select.
1 2 3
To Next Page
Loading...
