Roche Accu-Check Insight - Page 117

8
107
4 5
The Signal suspension screen appears
with the start time highlighted.
Press x or z to set the start time.
Press o.
The Signal suspension Status screen
appears.
Press x or z to move to O, Once, or
Repeat as needed.
Press o to select.
7
The Normal, Quiet, Vibrate or Loud screen
appears.
Press z to move to Signal suspension.
Press o to select.
6
The end time is highlighted.
Press x or z to set the end time.
Press o.
When set to Once, the signal will be paused only once. When set
to Repeat the signal will be paused each day for the specified
time.
When the suspension time has expired, the suspended warnings
will occur.