Roche Accu-Check Insight - Inserting a New Cartridge

26
2.3 Inserting a new cartridge
Before starting your insulin pump for the first time you must
insert a new cartridge.
When the insulin in your cartridge is running low, you will be
prompted with a Warning W31: Cartridge low, which means that
there is only a specified number of insulin units left. You can
adjust the Cartridge warning level in the Therapy settings. When
the cartridge is completely empty, your pump sends a
Maintenance message M21: Cartridge empty and you must
change the cartridge immediately.
Have the following materials ready:
j An Accu-Chek Insight insulin pump cartridge (self-filled) or a
NovoRapid
®
PumpCart
®
(pre-filled)
j A new Accu-Chek Insight infusion set
Insert the cartridge
From the Status screen, press o.
1 2
The main Menu appears.
Press z to move to Cartridge and
infusion set.
Press o to select.
3
The Cartridge and infusion set menu
appears.
Press o to select Change cartridge.
Note
Ensure the cartridge and insulin are at
room temperature.