Roche Accu-Check Insight - Chapter 7: Modes for Different Life Situations; Understanding Pump Signal Modes

5
73
4 5
The Basal Profile 2 (3, 4, or 5) screen
appears. The End of the first time block is
highlighted.
Press x or z to set the time.
Press o.
The Program Basal Profile screen
appears.
Press x or z to move to Basal Profile 2
(3, 4, or 5) .
Press o to select.
1 2
The main Menu appears.
Press z to move to Basal.
Press o to select.
The Basal menu appears.
Press z to move to Program Basal
Profile.
Press o to select.
3
From the Status screen, press o.
Program Basal Profile 2 (3, 4, or 5)
The hourly basal rate for the first time
block is highligted.
Press x or z to set the hourly basal rate.
Press o.
6