Roche Accu-Check Insight - Changing the Pumps Signal Mode; Bluetooth Communication with Other Devices

84
Change the Signal mode
1 2
The main Menu appears.
Press z to move to Modes.
Press o to select.
The Modes menu appears.
Press o to select Signal mode.
3
From the Status screen, press o.
The Signal mode screen appears.
Press x or z to move to Normal, Vibrate,
Quiet or Loud.
Press o to select.
4
The pump returns to the Status screen and the new mode is
active immediately. You can learn how to adjust the Signal
modes to your personal needs in the chapter about Settings. See
chapter8.3.1, page103.