9 • Initial Startup
128
9.15 Beeper options
This setting can be used to set the volume of the beeper.
1 Touch in the Main Menu to open the Main
Menu 2 screen.
2 Touch Beeper to set the volume.
3 Touch the button with the desired volume. When
you touch a button, the meter will beep at the
corresponding volume.
4 Touch to save the setting and return to the
Main Menu 2 screen.
Main Menu
Review Results
Control Test
Patient Test
12:48 pm
09/18/13
Main Menu 2
Maintenance
Strip Lots
Profi ciency
Control Lots
Beeper
Linearity
Diagnostics
Linearity Lots
Admin.
12:48 pm
09/18/13
Beeper Setup
Medium
Low
High
Beeper Volume:
12:48 pm
09/18/13
To Next Page
Loading...
