Maintenance and Care • 10
139
10.3 Logging maintenance activities
Cleaning, disinfecting, and other maintenance activities
can be logged in the meter. Make sure that all cleaning
activities are complete and the system is thoroughly dry
before switching on the meter.
To store cleaning information in the meter, proceed as
follows:
1 Touch in the Main Menu to open the Main
Menu 2 screen.
2 Touch Maintenance to open the screen for adding
comments.
3 Select the desired comment(s) from the list or
touch to enter your own comment via keypad.
4 Once you have entered your comments, touch
to save the maintenance comments. The Mainte-
nance Test screen opens up.
5 Touch to return to Main Menu 2.
You can add up to three comments. For details see
section “Adding comments” on page 54.
Main Menu
Review Results
Control Test
Patient Test
12:48 pm
09/18/13
Main Menu 2
Maintenance
Strip Lots
Profi ciency
Control Lots
Beeper
Linearity
Diagnostics
Linearity Lots
Admin.
12:48 pm
09/18/13
Add Comments
09/18/13
Cleaned Meter
12:48 pm
Maintenance Test
NEW BATTERY PACK
Cleaned Meter
12:48 pm
09/18/13
To Next Page
Loading...
