11 • Troubleshooting
148
Automatic shutdown (power-off)
The meter powers off after a configurable time without
activity (e.g., pressing a key, touching the screen) to
conserve energy. In addition, the meter may power off auto-
matically for the reasons listed below. Reactivate the meter/
screen as described in the following:
Power-off after time specified by
system administrator (default is
5 minutes, configurable by system
administrator)
– Press the On/Off button on the meter.
Battery Low – Charge the battery by placing the meter in the base unit.
Battery Critically Low – Charge the battery by placing the meter in the base unit.
– Check that the battery pack is correctly installed and
connected.
– Replace the defective battery pack.
Follow the instructions in Chapter 9 to avoid data loss when
replacing the battery pack.
Display/symptom Possible solution
To Next Page
Loading...
