1 • Introduction
28
1.4 Overview of the meter
The meter has the following elements:
1 Test strip port
Insert the test strip here.
2 Touchscreen
(touch-sensitive display)
This screen allows you to perform patient tests, per-
form controls tests, and review results. To select
any of these functions, simply touch the button on
the screen.
3 On/Off button
Press this button to power the meter on or off.
4 Barcode scanner
The integrated barcode scanner can be used to
read operator and patient IDs.
5 Battery compartment cover
Remove to insert the battery pack.
6 Charging contacts
These contacts are used to charge the battery pack
when the meter is in the base unit.
7 Infrared window
Facilitates data communication with code key
reader and base unit.
1
2
3
4
5
7
6
To Next Page
Loading...
