Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter • 6
77
Editing test strip data As mentioned at the beginning of this chapter, you can
edit several parameters for test strips, the expiration date
and the value ranges for control solutions.
1 Use the keypad to enter the desired expiration date
(use two digits and leading zero, if necessary). It is
not possible to enter a date beyond the expiration
date stored in the key.
2 Touch to accept the modified date and con-
tinue to the value ranges.
Add Strip Lot
Strip Lot Confi rmation
D-530: Do you want to
use the suggested
v
alues for strip 545603?
Use by: 02/10/14
L1(Lo): 2.4-4.1 mmol/L
L2(Hi): 16-21.6 mmol/L
12:48 pm
09/18/13
123
456
789
0
Strip Expiration
11/30/13
12:48 pm
09/18/13
To Next Page
Loading...
