11
Touch the yellow
edge of the test strip
to the blood drop.
Do not put blood on
top of the test strip.
Remove your finger from the test strip
when the flashing hourglass symbol
appears. Failure to move your finger
away from the test strip could give
inaccurate test results.
Your test result appears with an arrow. This arrow shows if your test result falls above,
within, or below the target range.* The target range is represented by the green region
of the target range indicator. The arrow will flash if your test result falls above or below
this range.
Remove and discard the used test strip by pulling the test strip out of the meter or by
pushing the test strip ejector on the side of the meter.
*The target range is set by default at 3.9–8.9 mmol/L. To change the target range, pair
the meter to a mobile device, or connect it to a PC with diabetes management software
installed. Consult your healthcare professional before changing the target range.
Blue
Test result is above the
target range.
Green
Test result is within the
target range.
Red
Test result is below the
target range.
Press here to eject test strip.
82688_09291423001_01.indd 1182688_09291423001_01.indd 11 8/20/2020 1:58:20 PM8/20/2020 1:58:20 PM
To Next Page
Loading...
