20
Wireless Communication and Meter Pairing
Overview
The process of creating a connection
between the meter and the mobile device
is called pairing. You will need an
application on your mobile device that can
accept the meter data. You can use this
application to wirelessly and automatically
synchronises your diabetes information
between the meter and the mobile device.
Pairing
The meter can only pair with 1 device at a
time. Pairing with a second device
overwrites the first pairing.
The meter and the device to be paired
should be within 1 metre of each other.
On Your Mobile Device
Open the app and select Pair Meter. If
prompted, turn on Bluetooth.
On Your Meter
With the meter o,
press and hold
until the Bluetooth
symbol appears. The
pairing symbol and
wireless symbol both
appear and flash.
On Your Mobile Device
Within the app, select your meter from
the list of found meters. When
prompted, enter the 6‑digit PIN number
located on the back of your meter.
The meter times out after 30 seconds
once you are prompted to enter the PIN.
On Your Meter
or
OK appears if pairing is successful. Err
appears if pairing is unsuccessful.
NOTE
The meter has time and date auto‑sync
capability when paired with a mobile
device that will update the meter time
and date automatically. Even if you use
your meter in multiple time zones,
results are stored from newest to
oldest and not by time and date.
Transferring Data Wirelessly
If the meter is paired with a mobile device
and Bluetooth is on, your test results will
be sent to the paired device automatically.
82688_09291423001_01.indd 2082688_09291423001_01.indd 20 8/20/2020 1:58:43 PM8/20/2020 1:58:43 PM
To Next Page
Loading...
