Roche Accu-Chek Instant - Setting the Time and Date

8
Your New System
1
Setting the Time and Date
1
Press to turn the
meter on.
The flashing test strip
symbol appears on the
display.
2
Press and hold until
set-up appears on the
display. The hour
flashes.
Press
to increase
the hour or press
to decrease the
hour.
3
Press and hold to
set the hour and move
to the next field. The
minutes flash.
Press
to increase
the minutes or press
to decrease the
minutes.
4
Repeat step 3 to adjust
each field. After setting
the year, press and
hold
until the
flashing test strip
symbol appears to save your settings.
NOTE
• The meter prompts you to set the
time and date the first time you turn
the meter on or if an error occurs.
• Press and hold
at any time until
the flashing test strip symbol
appears to perform a test.
• The time and date on the meter
synchronises to the time and date on
the paired device each time the
meter sends data to the paired
device. See the chapter Wireless
Communication and Meter Pairing.
82688_09291423001_01.indd 882688_09291423001_01.indd 8 8/20/2020 1:58:00 PM8/20/2020 1:58:00 PM