Roche Accu-Chek Performa Nano - Meter Button Functions

Your New System
8
1
Button Functions
Here are the functions of the power/set button and arrow buttons on the meter. These functions are used
throughout this manual. For more information on using these buttons during meter setup, see Chapter 3,
Meter Memory, Setup, and Data Transfer.
Button Function Action
(power/set
button)
Turn the meter on or o.
Press and release .
Enter the set‑up mode.
Turn the meter on. Press and hold
until set‑up
appears on the display.
Set the chosen feature.
Press and release
.
Exit the set‑up mode at any time.
Press and hold
until the flashing test strip symbol
appears on the display.
Check the display segments.
Turn the meter o. Press and hold
to see the
complete display.
If one of the segments is missing or looks dierent
from the picture, do not use the meter. Contact
Roche.
(right arrow
and left
arrow
buttons)
Adjust settings for time and date,
beeper, test reminders, and
hypoglycemic alert.
Press and release or .
Press and hold or to scroll faster.
Enter memory.
Press and release
or .
Mark a blood glucose result.
Press and release
.
or
79718_07255233050_01_EN.indb 8 5/22/2019 1:44:51 PM