Roche Accu-Chek Performa Nano - Setting Meter Time and Date

Meter Memory, Setup, and Data Transfer
20
3
Press and release
(power/set button) to
turn the meter on.
The flashing test strip
symbol appears on the
display.
1
Press and hold until
set‑up appears on the
display.
The hour flashes.
2
Press and release or
to decrease or
increase the hour.
Press and release
to
set the hour.
The minutes flash.
3 4
Repeat step3 to set
minutes, day, month, and
year.
To set up more options,
press and release
.
To exit, press and hold
until the flashing test
strip symbol appears on
the display.
Setting the Time and Date
79718_07255233050_01_EN.indb 20 5/22/2019 1:44:53 PM