Roche CoaguChek XS System - Powering Off the Meter

CoaguChek XS System User Manual for Self-Testing, version 10.0 USA
28
7. Power Off
Power the meter off .
If, in the future, you need
to change the date and
time, press the SET button
to re-enter Setup
mode. After you have
changed the date and
time, just turn the meter
off . Other set-up
choices in the meter
should be set or changed
by your doctor.
The following is only applicable for software versions
5.40 and lower.
Ensure with the next test result that the measuring unit
is displayed as INR. If the result is displayed in %Q or
Sec, follow the instructions in the Testing a Blood
Sample section of this manual to reset the measuring
unit to INR.