CoaguChek XS System User Manual for Self-Testing, version 10.0 USA
32
Integrated Quality Controls
The CoaguChek XS System has built-in quality
control functions in the meter and test strips. The
meter automatically runs its own quality control test
as part of every blood test, so you never have to run
quality control tests with liquid quality controls.
When the quality control test runs, the letters QC
flash on the meter’s display. When the quality control
test is finished, a checkmark () appears following
the letters QC. Then the meter continues to run the
blood test.
If the quality control test fails, the meter displays this
error message. See the Error Messages section in
this manual for an explanation of this and other error
messages and what to do when they occur.
To Next Page
Loading...
