Roche Cobas 4800 System - Microweli Plate

3
Hardware
Instrument
NOTICE
Microweli
plate
cobas®
4800 System
Systeni !ulanual
The
microweli plate (AD-plate
0.3 mL) hoids the
processed samples
mixed with
working
master mix reagent and is
used for amplification
and detection on
the
analyzer.
The microweli
plate is placed in the
plate carrier
on position 3 prior to a run.
For details about the
plate carrier, see Plate carrier
(p.
55)
After
final sample processing
on the instrument
the microweil
plate is placed back on
the plate
carrier
by
the iSWAP.
Unload the plate
carrier and seal the
microweli plate
using the
sealing film.
iJ
For
details about sealing of the microweli
plate, refer
to the test-specific Operator’s
Manual.
Roche
Diagnostics
The microweil plate is
barcoded and designed for
one time use.
The software tracks
the use of the plate and rejects
previously used microweli
plates.
• Open the
primary
packaging of the
microweli
plate before
use.
Open
the packaging
only in a clean environment
to
prevent
contamination
of the piste.
• Never touch the
weils of a
microweil
piste to
avoid contamination.
• Do not seal the
microweli piste before loading
the piste into the instrument.
[
Figure
3-30
Deepweil piste
Instrument
damage
due to use
of unsuitable
deepweil plates
Use only deepweil
plates designed for the instrument.
60
System Manual
. Version 1.0