Roche cobas p 512 - Switching the System on

Part C - Operation cobas p 512
3-14 Operator's Manual - Version 1.6 - 10/2015
3.3.4 Switching the system on
NOTICE
If a Silver Server from Roche PVT is used for communication with the LIS, switch this on first.
If a centrifuge module is connected to the cobas p 512 system, also switch this on.
Switch the system on. The main switch must be in the ON position. The system may take a
few minutes to start.
Figure
3-6: Main switch
Figure
3-7: Control light for the power supply
A
Main switch ON/OFF
B
Control light for main switch
The system now powers up, the control light turns green, the system software launches and
the login screen is displayed on the touch screen monitor.
A
B