Roche cobas p 512 - Page 172

Part D - Maintenance cobas p 512
4-12 Operator's Manual - Version 1.6 - 09/2015
4.4.1.2 Cleaning the gripper
In order to clean the lifting and turning grippers, you must wipe off their gripping surface
with a cloth soaked with ethyl alcohol. Use a brush on the gripper when it is very dirty.
NOTICE
Push the dislodging cylinder upwards when cleaning the turning gripper.
Figure 4-10 Decapper module, lifting gripper
A
Dislodging cylinder
B
Surfaces of the gripper arms on the turning gripper
C
Surfaces of the gripper arms on the lifting gripper
C
B
A