Part F - Appendix cobas p 512
6-16 Operator's Manual – Version 1.6 - 10/2015
Physical removal of data or files from the hard disk.
The aliquoter system calculates the depth of drive in according to the
total pipetting volume and the tube diameter.
Pump and dosing unit of the fluid system.
Glass cylinder on the dilutor with a defined maximum dosage volume.
Position of the pipetting unit when fluid is dispensed.
Plastic tray containing 96 disposable tips.
Transfer of data from another system.
Component of operating system used for processing texts
(e.g. programs, lists).
Sensor to control the stepper motor steps and to detect stepper motor
errors.
The information contained in an EPROM can be erased only under
certain conditions.
Tubes which cannot be processed due to an error
Collection of related data in a compatible format.
System to transfer the fluids.
A program that runs in the foreground, visibly and with interaction
from the user.
User and system-specific data.
Digital data carrier for data storage.
Configuration data of the hard disk (cylinders, heads, sectors).
Window on screen to help the operator solve problems that might
occur.
A sample carrier device that holds up to five sample tubes. The rack
enables easy transportation to analytical instruments.
An external information system of higher level which provides
services or a connection to a wider network.
A key or certain combinations of keys, by means of which particular
programs or commands can be executed.
The process that occurs after initially starting a work cycle, during
which the instrument prepares itself for operation.
Position of the individual axes during their initialization.
Field on the screen allowing data entry by the operator via the
keyboard.
Part of the rack module that supplies the primary samples to a
distribution process.
Input/output card. Interface between the computer and external
devices.
To Next Page
Loading...