Start-up
Preparing the MagNA Pure System
21
A
A
Waste containers
Place the tube in the holder in the top right corner of the compartment frame.
Transfer the waste container horizontally to prevent liquid spillage.
Drain the waste container. Discard the contents according to local regulations.
Rotate the internal waste container during draining and slowly pour out all liquid.
Keep the filter of the vent hole dry to avoid spilling of liquid waste through the vent hole.
Rinse the waste container with a suitable disinfection/decontamination reagent, see chapter "Mainte-
nance and Care" in the "MagNA Pure 96 Operator’s Guide".
Clean the waste container with water and dry it on the outside before inserting it into the instrument.