Roche MagNA Pure Compact Instrument - Ordering Guide; Related Products

Maintenance and Trouble Shooting
99
C
C
7. Ordering Guide
7.1 Related Products
These products are not available from Roche Applied Science, but recommended for use
with the MagNA Pure Compact Instrument.
䉴 Tubes for Maintenance and Internal Control
If needed, we recommend the following Sarstedt Tubes for use with MagNA Pure Com-
pact Instrument only. They have the appropriate specifications to ensure the correct
functioning of the instrument (pipetting, etc.).
Note: In case, tubes with caps are chosen, it is important to remove the caps before the
purification protocol begins. Failure to remove caps could result in damage to the instru-
ment and leads to an abortion of the respective action performed by the instrument (e.g.
purification run).
Recommended Printer for the Use with MagNA Pure Compact Instrument:
Hewlett Packard Laserjet 1015
For installation with the MagNA Pure Compact Instrument, please contact your local
Roche representantative.
2.0 ml tubes without screw cap Sarstedt-ID-No. 72.608
2.0 ml tubes screw cap enclosed Sarstedt-ID-No. 72.693
Specifications:
Performance (print speed; time to first page out) 14 ppm; 10s
Media Format 370x230x208 mm
Max. Resolution 1200 dpi effective output
Interfaces USB, parallel and ext. Networking
Memory 16 Mb
Paper Feed 150 sheets; 10 sheet priority
Network yes; external
Operating Systems WIN 98, Me, 2000, XP
WIN 95 and NT 4.0
Mac OS 9.1 and later
Mac OS X10.1 and later
Ordering Guide
Related Products
MagNA Pure Compact Manual.book Seite 99 Dienstag, 28. Februar 2006 4:16 16