MagNA Pure Compact Operator’s Manual - Version 1.3
46
B
B
How to Operate the MagNA Pure Compact Instrument
B
B
2.1 Purification
Action Handling Software programming
Please select the Run button from the Main
Menu Screen to get to the following screen.
The OPERATOR AUTHORIZATION Screen
appears. While at this screen, do the following:
a. Either accept the User name that appears in the
Operator field or select a different name from the
drop-down menu (accessed by touching the
Down button beside the field).
b. Enter the password
c. Cancel leeds back to the Main Menu.
d. Confirm your choices by touching the Next
button (which will be active only if the Operator
and Password fields are filled in and the pass-
word is correct).
Note: You cannot add new operator names
from this screen; these must be added from
the SETUP Screen (as described in chapter
A 3.4.3).
To change the password associated with a particular
operator name, touch the Change Password button. A
pop-up window will open to allow you to enter the
new password.
1
2
Performing a Purification Run
Purification
Performing a Purification Run
Purification
47
4_MagNA Pure Compact_ChapterB_2.fm Seite 46 Mittwoch, 8. März 2006 10:13 10
To Next Page
Loading...