Roche URISYS 2400 - Page 129

Roche Diagnostics
Operator’s Manual · Version 1.0 E-7
URISYS 2400 8 Data alarms (flags)
Handle alarms
a To print a cumulative list of alarms
1 Press <Menu> on the [Routine Monitor] screen. The [Menu] screen is
displayed.
2 Press <Tools>. The [Tools] screen is displayed.
3 Press <Alarm Trace>. The [Alarm Trace] screen is displayed.
4 Press <Print Cumulative Alarm>. The [Print Cumulative Alarm List]
window appears.
5 Press <Execute>.
6 Press <Stop> to cancel printing at any time.
Figure E-2 Example of a printout of cumulative alarm list
A
Identification flag (A: Alarm, R: Retry)
B Generation time
C Alarm date
D Power on time
E Printing date
F Printing time
G Generation frequency
H Sub category code
I Generation time
J Power off time
K Retry code
L Retry frequency
| |
| 04.04.2001 17:02 |1
| |2
| 04.04.2001 15:20 - |3
| 15:56 |4
| A ***-***-*** ***-***-*** ***-***-*** ***-***-*** |5
| |6
| R ***-*** ***-*** |7
| |8
|11 |9
| |10
| ***-***-*** |11
| |12
| |13
| |14
| |15
***-***-*** ***-***-*** ***-***-*** ***-***-***
03.04.2001 08:30 - 15:30
:08
A ***-***-*** ***-***-*** ***-***-*** ***-***-***
R ***-***
A
B
C
D
EF
GHI
KL J
CUMULATIVE ALARM TRACE