EasyManua.ls Logo

Rocker 300 - Unpacking; Package Inspection and Accessory Check

Rocker 300
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14. Please discard packing material according to local related regulations.
15. Operating condition
(a) Ambient temperature: 5~ 40°C
(b) Relative humidity: 80% RH Max.
(c) Power supply: 100-120V~, 50/60Hz or 200-240V~, 50/60Hz
(d) Altitude: up to 2000 m
(e) Pollution degree: II
(f ) Indoor use
* Warning: While Rocker 430 is operated as a compressor, please ensure a 20-min break while
every 30-min working to prevent the instrument shutdown from overheating.
2. Unpacking
Please check if the package is complete without any damage before unpacking. When unpacking,
please make sure you have all accessories that indicated on the list. If there is any problem, please
keep the serial number along with packing case and contact your local distributor immediately for
assistance.
2
* Before operation, please check whether the compatibility of materials of pump head, valve
plates and piston seal with used medium.
-Pump head: Aluminum alloy
Vacuum Pump
- Valve plates: FKM - Piston seal: PTFE complex
-Pump head: Aluminum alloy
Vacuum Pump & Compressor
- Valve plates: SUS - Piston seal: PTFE complex
Caution: Hot surface

Related product manuals