EasyManua.ls Logo

RocketFish InvisiShell RF-GWU1301 User Manual

RocketFish InvisiShell RF-GWU1301
1 page
Page #1 background imageLoading...
Page #1 background image
QUICK SETUP GUIDE
InvisiShell™
|
RF-GWU1301
Installing your InvisiShell™
1 Disconnect the Wii U GamePad.
2 Open the InvisiShell, then orient and align the GamePad with the
InvisiShell.
3 Gently press the GamePad into the InvisiShell.
4 Close the top half of the InvisiShell, then press down on the right side of
the InvisiShell until the side snap clicks into place. Repeat on the left side.
5 While rmly holding the GamePad, press rmly up on each tab to lock the
InvisiShell closed.
Removing your InvisiShell
1 Disconnect the Wii U GamePad.
2 While firmly holding the GamePad,
press firmly down on each tab to
unlock them.
3 Open the InvisiShell by using your ngertips
to slowly separate the InvisiShell on the right side until the side snap
releases. Repeat this on the left side.
4 To remove the GamePad, firmly hold the InvisiShell and gently press the
ZR or the ZL button to lift the GamePad out.
90-day limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
For customer service, call 1-800-620-2790
www.rocketfishproducts.com
™ and © 2012 Nintendo. Licensed by Nintendo.
ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2012 BBY Solutions, Inc. All Rights Reserved.
ENGLISH 12-1021
Tabs
Side snaps
Unlock
Tabs
Side snaps
Lock

Other manuals for RocketFish InvisiShell RF-GWU1301

Question and Answer IconNeed help?

Do you have a question about the RocketFish InvisiShell RF-GWU1301 and is the answer not in the manual?

RocketFish InvisiShell RF-GWU1301 Specifications

General IconGeneral
BrandRocketFish
ModelRF-GWU1301
CategoryAccessories
Frequency Band2.4 GHz
SecurityWEP, WPA, WPA2
InterfaceUSB 2.0
SeriesInvisiShell
TypeWireless Adapter
Wireless StandardsIEEE 802.11b/g

Summary

Installing Your InvisiShell

Disconnect Wii U GamePad

Disconnect the Wii U GamePad from its power source.

Open and Align GamePad

Open the InvisiShell, then orient and align the GamePad.

Insert GamePad into InvisiShell

Gently press the GamePad into the InvisiShell.

Close and Secure Top Half

Close the top half and press side snaps into place.

Lock InvisiShell Tabs

Press tabs firmly upwards to lock the InvisiShell closed.

Removing Your InvisiShell

Disconnect Wii U GamePad

Disconnect the Wii U GamePad from its power source.

Unlock Tabs

Press down on each tab to unlock the InvisiShell.

Separate InvisiShell Sides

Use fingertips to slowly separate the InvisiShell sides.

Remove GamePad

Press the ZR or ZL button to lift the GamePad out.

Warranty Information

Contact Rocketfish

Related product manuals