8
7 Connect the 8-pin (4+4) or 4-pin +12 V power connectors to your
motherboard.
8 Connect the Serial ATA (SATA) connectors to the peripheral devices.
9 Connect the peripheral 4-pin power connectors if you are still using an
IDE connector for hard drives or an optical drive.
10 Connect the 6-pin +12 V PCIe connector to your PCI Express graphics
cards, as needed.
11 Connect your case fans to the regular 4-pin peripheral connectors if you
are using these fans.
Caution: Make sure that all connectors are securely connected. Incorrect
connections could prevent your computer from starting and could damage some
components.
12
Close your computer case and connect the AC power cord to the power
supply.
RF-900WPS 09-0654_MAN_ENG_V2.fm Page 8 Tuesday, August 4, 2009 3:16 PM
To Next Page
Loading...