Do you have a question about the Rockford Fosgate Punch DVC RFP-1212 and is the answer not in the manual?
Speaker Type | Subwoofer |
---|---|
Size | 12 inches |
Power Handling (RMS) | 200 Watts |
Power Handling (Peak) | 400 Watts |
Sensitivity | 86 dB |
Basket | Stamped Steel |
Impedance | 4 Ohms |
Voice Coil Diameter | 2 inches |
Voice Coil | Dual Voice Coil |
Congratulates the customer on their purchase and highlights product quality.
Warns about permanent hearing loss from continuous exposure to high sound pressure levels.
Instructions for recording serial and model numbers for warranty and recovery.
Lists the contents of the Punch DVC Woofer Installation & Owner's Manual.
Details the rigid, lightweight, and corrosion-resistant steel basket.
Explains the spruce pulp paper cone treated for rigidity and low distortion.
Describes the resilient Santoprene surround for improved frequency response.
Highlights the proprietary flat spider design for reduced mechanical distortion.
Explains the durable and environmentally friendly powder coat finish.
Discusses the inverted dust cap for increased cone rigidity and power handling.
Details the anodized aluminum former for efficient thermal transfer and power handling.
Explains the extended pole piece for a linear magnetic field and better low frequency response.
Describes the vented back plate for increased excursion and power handling.
Explains the dual voice coil design for multiple impedance load configurations.
Provides recommended sealed and ported enclosure volumes for 8" and 10" Punch DVC woofers.
Provides recommended sealed and ported enclosure volumes for 12" and 15" Punch DVC woofers.
Provides guidance on constructing rigid, sealed enclosures using MDF and bracing.
Explains how to calculate enclosure volume using box dimensions and a formula.
Discusses passive and active crossovers, recommending an active low-pass crossover.
Explains series, parallel, and series-parallel wiring for connecting speakers to amplifiers.
Presents Thiele-Small data for RFP-1208, RFP-1210, RFP-1212, and RFP-1215 models.
Details warranty length, coverage, limitations, and procedures for obtaining service.
States the product is designed and assembled in the USA and provides company contact details.