Need help?Do you have a question about the Rockford Fosgate R152-S and is the answer not in the manual?
General| Tweeter | Yes |
|---|---|
| Impedance | 4 Ω |
| Rated power | 80 W |
| Sensitivity | 85 dB |
| Speaker type | 2-way |
| Frequency range | 58 - 20000 Hz |
| Crossover frequency | 4500 Hz |
| Driver diaphragm material | Polypropylene |
| Shape | Oval |
| Separate components | - |
| Subwoofer included | No |
Weight and Dimensions| Weight | 1650 g |
|---|---|
| Mounting depth | 26.88 mm |
| Tweeter diameter | 13 mm |
Warning to disconnect the battery negative terminal before installation to prevent damage.
Advises on protecting hearing from prolonged exposure to high sound pressure levels.
Ensuring adequate space and checking for obstructions for speaker mounting.
Using specification charts or templates to determine the correct cutout diameter.
Marking and drilling pilot holes with the specified bit size for mounting screws.
Feeding speaker wires through the cutout and connecting them, observing polarity.
Tightening screws until the speaker is snug to prevent rattling without overtightening.
Explanation of the built-in 6dB/octave high-pass crossover for component systems.
Detailed technical specifications for R152-S, R1652-S, and R1T-S models.
Illustration showing correct wiring connections between amplifier, woofer, and tweeter.
Visual guide to flush and surface/angle mounting configurations for the R1T-S tweeter.
Diagrams detailing physical dimensions and cutout requirements for the R152-S speaker.
Diagrams detailing physical dimensions and cutout requirements for the R1652-S speaker.
Information on what the warranty covers, exclusions, and limitations on implied warranties.
Instructions for obtaining service and details regarding EU warranty requirements.
To Next Page